SCREW STUDS 3/8″

Description

Genuine Lift the Dot Stainless Steel Self Tapping Screws – 3/8″

Quantity: Pack of 10

The self taping short and long thread studs are the most commonly used fittings. Although they are called self tap, you still need to drill a pilot hole. If fitting to gel coat we would advise on countersinking the hole because the gel coat could crack when tightening the stud. Making a decision between the lengths is simple, some boats and classic cars have thin walls, so if you don’t want a sharp point coming through the inside then use the short thread. They are both rigid and the short thread has enough thread to make it a good firm base.